There are many types of chemicals for above-ground pool water treatment. There are Algaecide, Cyanuric acid, and Muriatic acid. Read on to learn more. There are also several other chemicals you can use as well. If you want a green pool, you can use Algaecide. Generally, these chemicals will keep the water clear. If you’re unsure what kind you need, check the manufacturer’s recommendations.

Algaecide:

Algaecide for above-ground pools can be used to keep the water clear and healthy. The solution is simple: use algaecide after shock treatment. Wait until the chlorine levels in the pool are normal before adding algaecide. You should add algaecide to the pool 24 hours after the shock treatment. In case of an algal bloom, you should test the water every day, but you can also do it once or twice a week during the swimming season.

Cyanuric acid:

If you own an above-ground pool, you’ve probably wondered if you should add cyanuric acid to your water. The high levels of this acid can degrade the efficacy of chlorine. High levels of cyanuric acid will bind to chlorine, reducing its effectiveness in killing bacteria and preventing algae. Plus, CYA can make your water cloudy. There is only one way to remove cyanuric acid from your above-ground pool water effectively: add fresh water.

Muriatic acid:

Before adding muriatic acid to your above-ground pool, ensure the water is properly tested for pH levels. Low pH levels can cause skin irritation and eye irritation. It can also corrode metals, so you must test your pool water before adding muriatic acid. You can purchase a test kit from a local pool store or use test strips. Once you have the pH level, you can add muriatic acid in a slow, gradual manner.

Chlorine:

First, you should balance the water in your pool. You must keep the total alkalinity (alkaline levels) above 120 ppm to balance the water. Alkaline levels should be between 80 and 120 ppm. Pool chemicals can help you achieve this goal. Another important factor in pool water balance is the pH level. Too much or too low a pH can cause the water to be unsafe. The pH level of your pool should be between 7.2 and 7.6.